Have questions about what tools & products are right for your company?
Why? Well...VersaPin®’s one tool (VersaPin® ST4200 Pin Nailer) and its versatile number of fasteners cover multiple applications to cold formed steel. This allows you to bid more and more of the work that’s out there on each and every job site! VersaPin®’s speed and durability save Time...Money...and Manpower!
|2192A||.250 x .100 x 3/4" Gripshank®||Steel to Steel|
|2251A||.250 x .100 x 1" Helical||Steel to Steel|
|2251AG||.250 x .100 x 1" Helical||Steel to Steel|
|2252A||.250 x .100 x 1" Gripshank®||Steel to Steel|
|2255AG||.312 x .100 x 1" Gripshank® PT2000||Hardie Plank to CFS Furring channel|
|2324A||.312 x .100 x 1-1/4" Helical||Gypsum Sheathing|
|2325A||.312 x .100 x 1-1/4" Gripshank®||Gypsum Sheathing|
|2351A||.250 x .100 x 1-3/8" Helical||Plywood Sheathing|
|2351AG||.250 x .100 x 1-3/8" Helical||Plywood Sheathing|
|2351S||.250 x .100 x 1-3/8" Helical||Plywood Sheathing|
|2389NG||.250 x .100 x 1-1/2" Gripshank® - SuperSharp™||Plywood Sheathing|
|2352A||.250 x .100 x 1-3/8" Gripshank®||Plywood Sheathing|
|2352AG||.250 x .100 x 1-3/8" Gripshank®||Plywood Sheathing|
|2352S||.250 x .100 x 1-3/8" Gripshank®||Plywood Sheathing|
|2352SG||.250 x .100 x 1-3/8" Gripshank®||Plywood Sheathing|
|2385A||.312 x .100 x 1-1/2" Gripshank®||Hardie Plank and Plywood Sheathing|
|2385AG||.312 x .100 x 1-1/2" Gripshank®||Hardie Plank and Plywood Sheathing|
|2501S||.250 x .100 x 2" Helical||Plywood over 1" Foam & 2x4 to CFS|
|2501SG||.250 x .100 x 2" Helical||Plywood over 1" Foam & 2x4 to CFS|
|2502S||.250 x .100 x 2" Gripshank®||Plywood over 1" Foam & 2x4 to CFS|
|2502SG||.250 x .100 x 2" Gripshank®||Plywood over 1" Foam & 2x4 to CFS|
|2505SB||.312 x .100 x 2" Gripshank®||Double Layer DensGlass|
|2505SBG||.312 x .100 x 2" Gripshank®||Hardie Plank over 1" Foam to CFS|
|2509NG||.312 x .100 x 2" Gripshank® - SuperSharp™|
|2631SG||.250 x .100 x 2-1/2" Helical||Used with WF50 washer for 1 1/2" Foam to CFS|
|2635SBG||.250 x .100 x 2-1/2" Gripshank®||Hardie Plank over 1" Foam and 5/8" DensGlass|
|2639NG||.312 x .100 x 2-1/2" Gripshank® - SuperSharp™|
|3258A||.325 x .137 x 1" Double Knurl||Plywood to tube steel for Cargo Trailer Interior walls|
Allowable shear capacity Thru Foam Plastic Insulated Sheathing (FPIS) using the Aerosmith 2635SBG pin, establishing the minimum fastening requirements to support various cladding weight. The components of the test are R-9 Zip System® R-Sheathing to 54 mil steel framing.
This report, issued by ICC Evaluation Service, Inc covers the use of Aerosmith pins for: attach wood structural panels to cold-formed steel wall applications under the IBC, to resist in-plane wind or seismic forces in Seismic Design Categories A & B. The fasteners may be used in structures regulated under the IRC when an engineered design is submitted in accordance with IRC Section R301.1.3.
This report, produced by PEI Evaluation Service®, covers the use of Aerosmith’s .100” VersaPin®s with A) James Hardie, Allura, and Fiber Cement Products, B) Densglass® Gold and Exterior Gypsum Sheathing, C) Plywood and OSB Shear Wall, D) Sure-Board® Series 2000 Structural Panels, E) Plywood and OSB Horizontal Diaphragms with various gauges of LGS attached with .100” and .145” Gripshank® and Helical Aerosmith pins. Code compliance for Uniform Building Code, International Building Code, International Residential Code, ASCE 7-10, Florida Building Code and the National Building Code of Canada
Extensive report by Reynaud Serrette, Ph.D. of the Light Gauge Steel Research Group at Santa Clara University. This report covers shear and tension testing of pin connections in various gauges of steel, the results of these tests and the comparison to the widely-utilized ANSI Screw Equations for similar fastenings. Intended for use by architects and engineers.
Aerosmith® now carries a full line of anchors that meet the criteria for use in cracked and uncracked concrete, Category 1!